Home > AR-15 >

ADK Arms - 223/5.56 Bolt Carrier Group, Nitride QPQ

Alternative Views:

Our Price: $129.95
Sale Price: $60.00
Savings: $69.95

Quantity in Stock:
Availability: Usually Ships in 2 to 3 Business Days
Product Code: 332-100-N

Description Product Disclaimer Extended Information
ADK Arms tried and true 223/5.56 bolt carrier group is engineered and designed to the highest tolerances and military specifications and beyond. Our superior nitride QPQ finish ensures long term durability and lubrication. Each BCG features our famous MPI "bionic bolt" which has exceeded 50,000 rounds in full auto, fully suppressed testing without fail.

Friendly Reminder: Always check your head spacing.

Recommended Ammunition:

Never use damaged, bent, corroded, dirty, wet, or oiled ammunition.

You should only use commercial grade ammunition in its original packaging which corresponds with the caliber that is imprinted on the gun.

Do not use refurbished, reloaded, hand-loaded, or non-standard ammunition of a different caliber.

  • Carrier:

    - 8620 heat treated (case hardened to SAE-AMS-6875). QPQ / nitride / melonite coated


    - 9310 Heat treated (case hardened to SAE-AMS-6875) with additional cryo freeze for extra strength.
    - Shot peened precision ground diameters.

    - Magnetic particle inspected to ASTM E1444 aircraft quality inspection procedure for molecular soundness and longer life of the Bolt.


    - Aircraft quality alloy steel shot peened.

    - Heat treated to military drawing specification SAE-AMS-6875.

    - Phosphated to of MIL-STD-171.

    Gas key:

    - Gas key bolt, grade 8 fully knurled.

    - Gas key, aircraft quality steel heat treated to SAE-AMS-6875 QPQ HT PROCESS .

    Cam pins:

    - Precision machined.

    - Heat treated to SAE-AMS-6875.

    - Phosphated to of MIL-STD-171

    Firing pin:
    - Machined and precision ground for accuracy

    - Heat treated to military drawing specification per SAE-AMS-6875

    - Chrome lined per 1.2.2 of mil-std-171

    Firing pin retaining pin:

    - Unique designed custom steel pin contouring the carrier body.

    - Heat treated to SAE-AMS-6875.

    - Phosphated to of MIL-STD-171.


    - Precision machined.

    - Heat Treated to SAE-AMS-6875.

    - Phosphated to of MIL-STD-171.

    Gas rings:

    - 3 pc. stainless steel per Mil-Spec.


    To assure the highest degree of consistency and reliability, ADK Arms invests in premium extractor springs from Tactical Springs LLC / Sprinco USA along with a Mil-Spec Black Viton Extractor O-Ring per MIL-R-83248C. The springs are constructed from Chrome Silicon wirestock, a high tensile strength alloy ideally suited for high heat and high cyclic rate applications. The springs are heat treated, stress relieved, moly-plated, and most importantly, Cryogenic Processed post winding. While Cryogenic Processing typically extends the duty cycle of Chrome Silicon springs 3X - 7 X, these extractor springs have proven to surpass that multiplier. Unlike Music Wire or 17-7PH Stainless extractor springs which can require replacement at 2,500 to 5,000 round intervals for maximum reliability, this is likely to be the only extractor spring you’ll require for the life of the bolt! Numerous accounts have been recorded from customers with round counts in excess of 100,000 cycles on a single spring and O-ring with no noticeable degradation in performance. You’ll go through a number of barrels and extractors along the way to reaching that level, but the spring and O-rings can stay along for the ride.

    Results may vary, but ADK Arms has spared no expense in our commitment to provide you the very best in long term performance and reliability of our products! Go here for more information on these springs.

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
So far, so good January 13, 2017
Reviewer: Anonymous Person  
I put two of these into use about 18 months ago in two uppers, a 16" midlength and 18" rifle gas, and have had zero problems so far - admittedly with limited round counts under 500 each.  They need a short break-in period, maybe 50 rds, and then become very slick.  They also look good and have a quality feel.

Was this review helpful to you?